the wining robot is controlled with an Xbox controller, the robots are made with 3d printing, probably work on the programming it more to do more things. Garrett Coffin
Chris VanYe 1. xbox controller 2. 3D printed 3. One way the robots could be better is if they had a programmed in fail safe to correct balancing issues.
With an xbox controller
ReplyDeletethey were 3D printed
make them more stable
Nicholas Muhleman
Xbox 360 Controller, 3D printed, They could have 4 legs instead of 2 to make them more stable. Alex haston
ReplyDeletethe wining robot is controlled with an Xbox controller, the robots are made with 3d printing, probably work on the programming it more to do more things.
ReplyDeleteGarrett Coffin
1. Some use ipad, some use the controller of X-BOX.
ReplyDelete2. They use 3-D printer.
3. Make robots' gravity center lower.
Brady Zheng
Chris VanYe
ReplyDelete1. xbox controller
2. 3D printed
3. One way the robots could be better is if they had a programmed in fail safe to correct balancing issues.
1. Xbox 360 controller
ReplyDelete2.The parts were 3-D printed
3.They could have a lower center of gravity so they would be harder to knock down
-Katelyn
1. Xbox 360 Controller
ReplyDelete2. 3-D printed parts
3. Should have made a third leg to increase balance.
Joe Haj
xbox controller
ReplyDelete3d printed
needs more carnage.
xbox controller
ReplyDelete3d printed
needs more carnage.