1. They first 3-D printed a skeleton of a human hand. 2. The foundation was to duplicate the human hand as mechanically as possible. 3. 10 Dynamixel servos Joe Haj
Chris VanYe 1. they laser scanned a human skeleton hand and then 3D-printed artificial bones to match 2. the foundation was the design of an actual hand 3.10 dynamixel servos
1.They 3D print artificial bones from the laser-scanned model of a cadaver skeleton hand and connect them with artificial finger joints whose range of motion, in order to make it more likely to human hand. 2. 10 Dynamixel servos. Brady Zheng
1. They first 3-D printed a skeleton of a human hand.
ReplyDelete2. The foundation was to duplicate the human hand as mechanically as possible.
3. 10 Dynamixel servos
Joe Haj
Chris VanYe
ReplyDelete1. they laser scanned a human skeleton hand and then 3D-printed artificial bones to match
2. the foundation was the design of an actual hand
3.10 dynamixel servos
It was 3-D printed
ReplyDeletethe base was designed after a human hand
10 dynamixel servos
Nicholas Muhleman
They scanned a human hand and 3d printed it. The foundation was to make an anatomically accurate human hand. 10 dynamixel servos. ALEX HASTON
ReplyDelete1.They 3D print artificial bones from the laser-scanned model of a cadaver skeleton hand and connect them with artificial finger joints whose range of motion, in order to make it more likely to human hand.
ReplyDelete2. 10 Dynamixel servos.
Brady Zheng
They laser scanned a human hand skeleton.
ReplyDelete3-D printed bones
10 Dynamixel servos
-Katelyn
they 3-D printed a human skeleton, the foundation was a design of a hand, 10 dynamixel servos.
ReplyDeleteGarrett Coffin
3d print hand replacement
ReplyDeletex ray of human hand
10 dynamixel servos
-Wyatt Coffin